![]() Don't hold the drive in your hand because if the drill bit catches and the drive starts to spin - or "helicopters" - on the end of the drill then there's a real risk of injury. In the pop-up small window, choose a wiping method, and hit 'OK' Step 3. Right click the external HDD at main interface and select Wipe Hard Drive from the given list. Install and run AOMEI Partition Assistant. I aim for the spot marked by the red Xs on hard drives.Īlternatively you can use a power drill to make holes, but make sure that you have a way to securely hold the drive, for example, using a vice. Connect your external hard drive to the Windows 10 and make sure it can be detected. Ideally you want to put a nail through the platters of the drive, going all the way through (it's actually not as hard as it sounds). Securely erase a SATA HDD/SSD without a host device, or dock your drive for easy access. ![]() Eye protection - you've only got a maximum of two to start with, so it's silly to take chances!.A block of wood - so you don't nail the drive through your floor (it's preferable to do this outside if you can). ![]() Click 'Apply' and 'Proceed' to complete the pending operations. Choose a wiping method in the ejected windows, and press 'OK'. Right-click the external hard drive and select 'Wipe Hard Drive'. Install and open AOMEI Partition Assistant Standard. Thick gloves - because you're going to be hammering that nail through the drive using the hammer, and hammers seem to be magnetically attracted to thumbs Connect your external hard drive to Windows 11 and be sure it can be detected.A thick nail (a 6-inch nail will do fine).A hammer (I use my trusty 32oz "fine adjustment" hammer).This method also works great if you just want to destroy drives before you take them to the recycling plant. Not sure how to erase a device? I guarantee you that if you get a big enough hammer and spend enough time hammering, this will work on anything!
0 Comments
Leave a Reply. |